How To Install Android 4.2.2 Update For Galaxy Nexus Manually
Google is rolling out the Android 4.2.2 build for Galaxy Nexus, the update is aimed to fix plague bug. Galaxy Nexus is receiving the Android 4.2.2 firmware update through OTA (over the air) but if you haven’t received the update yet and can’t wait or having any trouble with OTA, simply download and install the Android 4.2.2 OTA update for Galaxy Nexus manually. The Android 4.2.2 firmware version is JDQ39.
This guide shows you how to update Galaxy Nexus to Android 4.2.2 firmware manually. Your Galaxy Nexus must be on stock firmware build number JPO04D, check your device detail from Setting>About Phone. Use Windows PC with Android ADB installed, you can check our this guide to install Android ADB drivers.
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or gets damaged following this guide.
Step #1: Download Android 4.2.2 OTA update for Galaxy Nexus depending on variant:
Step #2: Download Fastboot Package and unzip it into C drive, the zip file will generate fastboot folder having four files, then copy download update zip file to fastboot folder too.
Step #3: Turn your Galaxy Nexus off.
Step #4: Reboot your Galaxy Nexus into recovery mode, to do so reboot tablet by holding down volume up, volume down and power buttons into bootloader mode, there use volume keys to navigate and power key to select, you need to select recovery option to enter in recovery mode. Android logo will appear, then press volume up button while holding down power button to open recovery mode.
Step #5: Once you’re in recovery mode, select apply update from adb option.
Step #6: Plug your Galaxy Nexus to PC using a USB cable.
Step #7: Open up command prompt and navigate to fastboot folder by entering following command:
Step #8: Enter following command to make sure your device is plugged properly or not, if the command generate serial number of your tablet, your device is plugged to PC properly otherwise not:
Step #9: Enter following command to start installation (type update file name you downloaded in first step):
adb sideload “filename”
Step #10: Once the installation is done, on your Galaxy Nexus select “reboot system now” to reboot the device.
That’s it, you’re done. The Android 4.2.2 update is now installed on your Galaxy Nexus, if you experience any error, leave comment.