How To Root Galaxy Note 2 LTE N7105 With CF-Root Tool
The CF-Root developed by a senior XDA developer Chianfire is one of most popular rooting tool for Samsung devices and its latest version – CF-Auto-Root makes your rooting really easy, this root install ClockworkMod recovery on the phone, then reboot phone into recovery mode, in recovery it root the device and then it restore the recovery back to your phone, it also increase the flash counter of your phone but you should not be worried about that because Chainfire’s Triangle Away app allows you to reset the flash counter of your device. Rooting enables to acquire full control over your Android device and the CF-Auto-Root is available for the Galaxy Note 2 LTE N7105.
This guide shows you how to root Galaxy Note 2 LTE with CF-Auto-Root tool. You need a windows PC with USB drivers installed, use the KIES to install drivers but before start rooting disable, rooting doesn’t delete anything but just for safety back up everything, you can sync your contacts with Gmail account and for messages use SMS apps, lastly use file expert app to backup apps.
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or gets damaged following this guide.
Step #1: Download the CF-Auto-Root tool for Galaxy Note 2 LTE from here.
Step #2: Unzip the downloaded CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip file into a folder and run Odin3-v1.85.exe.
Step #3: Turn off your device and reboot it into download mode by holding down volume down, home and power buttons, then press volume up button to enter in download mode.
Step #4: Plug the device to PC and Odin will detect it, ID:COM will turn yellow and a message saying ADDED will appear. (Note: If Odin doesn’t detect the device, make sure that USB drivers are properly installed on your computer).
Step #5: Click on PDA Button and locate CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 from the folder where you’ve unzipped above files in the step 2. (Note: Don’t make any change, just make sure that re-partition is unchecked).
Step #6: Click on Start button to start installation, once the installation done, your device will reboot itself and you’ll see message saying PASS (Note: If Odin refuse to install the update and show message FAIL, or get stuck, close the Odin and unplug device, then pull out battery from the device for a few seconds. Then put the battery back to the device and reboot into download mode. Then install the firmware again) your phone will reboot into recovery mode, there it will root the tablet automatically and then reboot phone again.
Step #7: Unplug the device from PC.
That’s it, you’re done, your Galaxy Note 2 LTE is rooted now, install any root-required app now. If you experience any error, do comment and be sure to use Triangle Away to reset the flash counter.