Improve the Performance of your Android 4.0 on Your Acer Iconia Tab A500
If you are using Android 4.0 ICS on your Acer Iconia A500 and want to speed it up or want to make a high quality performance you are on a right place because there is a Rom named Lightspeed ROM that will help you for this purpose. But before you get started make sure that you have managed your back-up because the below steps can damage your valued data. You also need Acer Iconia Tab A500 with full battery life.
Before you get started make sure that you have a rooted Acer Iconia Tab A500 with ClockworkMod Recovery installed.
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or get damaged following this guide.
First of all you need to download the latest version of the Lightspeed ROM to your PC from here and using the USB Cable connect your device to PC and simply copy the ROM to the Root of your SD Card.
Now you need to Boot the tablet into Recovery In recovery mode, create a nandroid backup of existing ROM, if anything should not work out something expected on this ROM, it will helps you to easily revert back to your current state, to create select “Backup and Restore”, and on the screen that follows select “Backup” again.
This allows you to revert to it if the Lightspeed ROM does not work out. You can do this through “Backup & Restore.”
Select “Wipe Data/Factory Reset” then select “Mounts and Storage” and then select “Format System”.
After that, select “Install ZIP from SD Card.” Select the Lightspeed ROM ZIP file and bear out that you want to begin installation.
When the Installation Done select “Go Back”.
In the just select “Reboot System Now”.