Install Android 4.1.2 Jelly Bean update for Galaxy Music [official S6010XXUBME1 firmware]
The Samsung Galaxy Music is finally receiving the Jelly Bean update, Samsung is now rolling out the Android 4.1.2 Jelly Bean S6010XXUBME1 firmware for the Galaxy Music in United Kingdom but you no need to worry as the update will arrive to other countries soon in near future but if you can’t wait, simply pull out the update and install it manually using Odin.
This guide shows you how to install Android 4.1.2 Jelly Bean update on Galaxy Music manually (official S6010XXUBME1 firmware). Ensure you’re using a Windows PC and USB drivers are installed, you can download drivers from here. Disable all system tools such as Samsung KIES, antivirus, firewall program, please make a backup of your device data such as SMS, internet setting, contacts music files etc because the below procedure may wipe data, you can sync your contacts with Gmail account and for messages use SMS apps, lastly use the carbon Android app to backup apps and data.
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or gets damaged following this guide.
Update: The firmware may have been changed but it is still Android 4.1.2.
Step #1: Download the Android 4.1.2 Jelly Bean XXUBME1 firmware for Galaxy Music from here.
Step #2: Unzip downloaded zip file into a folder.
Step #3: Open the folder where you’ve unzipped above file and run Odin3.exe file.
Step #4: Turn the device off.
Step #5: Reboot the device into download mode, to do this, reboot phone by holding down volume down, home and power buttons.
Step #6: Once you’re in download mode plug the device to PC using USB cable. Odin will detect the device, ID:COM will turn yellow and a message saying ADDED will appear. (Note: If Odin doesn’t detect the device, make sure that USB drivers are properly installed on your computer).
Step #7: Click on PDA Button and locate S6010XXUBME1_S6010OXABME1_BTU_HOME.tar.md5 from the folder where you’ve unzipped above files in the step 2. (Note: Don’t make any change, just make sure that re-partition is unchecked).
Step #8: Click on Start button to start installation, once the installation done, your device will reboot itself and you’ll see message saying PASS (Note: If Odin refuse to install the update and show message FAIL, or get stuck, close the Odin and unplug device, then pull out battery from the device for a few seconds. Then put the battery back to the device and reboot into download mode. Then install the firmware again).
Step #9: If your device reboot into normal mode, you’re done, enjoy! But if you device gets stuck at boot screen, you need to perform wipe, to do so, turn off device, then reboot into recovery mode by holding down volume up, home and power buttons, in recovery mode, select the wipe data/factory reset, and confirm on the next screen. Once it done, select “Go Back” after that select “Reboot System Now” to reboot phone.
That’s it, the Android 4.1.2 Jelly Bean update having firmware version XXUBME1 is now installed on your Galaxy Music, if you experience any error, leave a comment below.