Install ClockworkMod Recovery 6.0 on Transformer Pad Infinity TF700T
Not a while ago, Koushik Dutta (developer of ClockworkMod recovery) updated the ClockworkMod recovery to the version 184.108.40.206 with numerous improvements, now you can take backups quickly and smaller too, the interface is now more responsive, you can restore backups having size up to 2GB and more. Now it’s more easy to install .zip files containing custom ROMs, take backups and wipe device. The ClockworkMod Recovery version 220.127.116.11 has been now ported to the ASUS Transformer Pad Infinity TF700T.
Read on how to flash ClockworkMod recovery 6.0 on Transformer Pad Infinity TF700T. The bootloader of your Transformer TF700T must be unlocked, you can unlock bootloder officially here and use a Windows PC, the Android SDK must be installed on your PC, you can follow our this guide to install Android SDK on your PC. Be sure to make a backup of your device data such as SMS, internet setting, contacts music files etc because the below procedure may wipe data, you can sync your contacts with Gmail account and for messages use SMS apps, lastly use file expert app to backup apps.
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or get damaged following this guide.
Step #1: Download the ClockworkMod Recovery 18.104.22.168 from XDA to your PC.
Step #2: Download fastboot package (fastboot.zip) to your PC.
Step #3: Unzip the downloaded fastboot.zip file into C:\, you’ll get fastboot folder, then also copy the downloaded recovery.img file to fastboot folder, the fastboot folder contains now five files.
Step #4: Turn off your Transformer Pad Infinity TF700T.
Step #5: Now hold down power and power buttons on your tablet, when you see a message “Press Vol. Up to enter RCK (5s)”. Leave both buttons but don’t press volume up button, after 5 seconds, you’ll see a new menu, then within 10 seconds, press the volume down button to highlight the USB icon and then press volume up button to enter in fastboot mode.
Step #6: Run the command prompt on your PC that can be found from Start>Programs>Accessories.
Step #7: Enter following command to enter in fastboot folder:
Step #8: Enter following command on command prompt, it will show the serial number of device, which means, the device properly connected with the PC:
Step #9: Now enter following command to install recovery.img
fastboot -i 0x0B05 flash recovery recovery.img
Once the recovery is installed, a message saying finished/OKAY will show up.
Step #10: Enter following command to reboot the device:
fastboot -i 0x0B05 reboot
That’s it, you’re done, when you need to enter in recovery mode, turn off the tablet, then reboot tablet by holding down volume down and power button, a menu will show saying press volume up to enter RCK, press the volume up to enter in recovery mode. If you faced any issue, do comment below!