Install Stock Firmware on Galaxy S Blaze 4G SGH-T769
Mostly people love to install new ROMs, custom recovery, etc on their Smartphone but accidentally brick the Smartphone, as well as some people get the Galaxy S Blaze 4G soft bricked during the installation of custom ROMs, custom recovery, etc, but now they no need to worry about it because the solution is available, just install stock firmware.
Thanks to XDA developer “konane”, who found this method to solve the issue. It’s important for every user of Samsung Galaxy S Blaze 4G SGH-T769.
Follow below guide to install it but first charge battery of device and disable all system tools such as Samsung KIES, antivirus, firewall program, please make a backup of your device data such as SMS, internet setting, contacts music files etc because the below procedure may wipe data, you can sync your contacts with Gmail account and for messages use SMS apps, lastly use file expert app to backup to back apps, and turn the USB Debugging on, to do so just tap Menu> Settings> Application> Development. USB driver should be installed on PC, get for 32-bit here and 64-bit here.
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or get damaged following this guide.
Instructions to Install Stock firmware
Step #1: Download following three files from XDA: Stock Firmware – PIT file – Odin3
Step #2: Unzip Odin and stock firmware into a folder.
Step #3: On Odin3 check “auto-reboot”, and uncheck all other options you see.
Step #4: Click on PDA button and locate downloaded files, first browse for the SGH-T769-UVLB7-hitsquad.tar file and then click on PIT tab and browse for the blaze.pit file.
Step #5: Turn the device off.
Step #6: Reboot the device into download mode by holding down the Volume Up + Volume Down + Power buttons till you see “Warning!” screen, there press the Volume Up button to enter Download Mode.
Step #7: Once you’re in download mode plug the device to PC using USB cable. Odin will detect the device, ID:COM will turn yellow and a message saying ADDED will appear. See below image.
Step #8: Click on Start button to start installation, once the installation done, your device will reboot itself and you’ll see message saying PASS.
Step #9: That’s it, unplug the device from PC and enjoy!