If you are using Samsung Galaxy S II and want to install XXKP1 Android 4.0 Firmware you are on a right place below you can see a guide for this purpose. Before you get started make sure that you have manage you back-up because below steps can damage your valued data. Here I’d like to say that this firmware and the guide below is compatible only and only with Samsung Galaxy S II, model number i9100.
All the steps are pretty easy and simple if you follow the steps accurately you can do it without of any trouble, you also need the drivers, download them from the below links.
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or get damaged following this guide.
After this you need to extract the Galaxy S2 Android 4.0 XXKP1 firmware (Password: samfirmware.com) to your pc and you will get these files:
Now Turn Off and old these keys together: Volume_down+Home+Power, to boot into download Mode.
Now you need to Launch Odin on your PC and then connect your Galaxy S2 to PC.
Select these files in Odin for the tabs:
Click the BOOTLOADER tab, select
Click the the PDA tab,select
Click the PHONE tab, select
Now, press START button to start installing the XXKP1 on your Galaxy S II
When process at Odin finishes your phone will reboot into recovery mod then you need to Reboot that’s it‼
- Install XXLP2 Firmware Leaked Firmware on Galaxy S II [how-To]
- Now Install XXKPA Firmware on Galaxy S II on Android 4.0 [How-to]
- Now Update Galaxy S2 I9100 Using Android 4.0.3 XXKPA Firmware [How-To]
- Learn How-To Install XXJVU Firmware on Galaxy S i9000
- Learn How-To Leaked Firmware XXLPH on Galaxy S II