If you are using Samsung’s Conquer 4G and want to Root and install ClockworkMod Recovery you are on a right place below you can see step-by-step guide for this purpose. Before you get started make sure that you have Sprint Samsung Conquer 4G SPH-D600 and don’t try this for any other device. Before you get started make sure that you have manage your back-up because below steps can damage valued data.
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or get damaged following this guide.
First of all you need to download Rooting tool from here and save the file to your PC and extract it
From the extracted folder, run SuperOneClick.exe and enable USB Debugging by: Settings > Application > Development > USB Debugging.
Using a USB Cable connect your device to PC and click the Root button in SuperOneClick to root the device.
Download and install the following apps on Samsung Conquer 4G:
Then download the following files to your PC:
- ClockworkMod Recovery image for Samsung Conquer 4G from here
- Required files for flashing CWM from here
Extract the files and using a USB cable again connect your device to PC.
Copy both files that you have downloaded on your device to the SD card and disconnect it.
Open the Root Explorer app on your phone and move flash_image to /data/local.
Open Android Terminal Emulator using the following commands:
- /data/local/flash_image recovery /sdcard/CWMR.img
- mount -o remount,rw -t yaffs2 /dev/block/mtdblock9 /system
- mount | grep system
- chmod 444 /system/etc/install-recovery.sh
Here I’d like to say that for some devices, the last command above will display an error message. This is not a cause for worry.