Everybody knows that Samsung has well known-known electronic company which as lots of wonderful devices and Samsung Galaxy R is also one of them if you are a user of Samsung Galaxy R and want to Root and ClockworkMod Recovery on this device you are on a right place below you can see step-by-step guide for this purpose. Before you get started make sure that you have manage your back-up because the below steps can damage your valued data, you also need to make sure that you have a Samsung Galaxy R with at least 70% battery.
Make sure that you have the drivers, you can download them from the below links:
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or get damaged following this guide.
Then run ODIN and click on PDA and choose the fie ClockworkMod Recovery file that you have downloaded before and also make sure that Repartition is un-checked.
Then using a USB Cable connect your device to PC and you‘ll see the device connected in ODIN, hit the Start button.
When the Odin will start the installation your phone will reboot after this you can disconnect the phone from your PC.
Now hold down the Volume Up and Home and Power Button at the same time to reboot into the recovery mode.
In recovery mode, create a nandroid backup of existing ROM, if anything should not work out something expected on this ROM, it will helps you to easily revert back to your current state, to create select “Backup and Restore”, and on the screen that follows select “Backup” again.
Now find the way to install zip from sdcard > choose zip from sd card and select the Superuser zip file you copied to the phone earlier.
When the installation Done, simply reboot your device.
- Learn How-To Root and Install ClockworkMod Recovery Samsung Conquer 4G [for Windows]
- Root and ClockworkMod Recovery on Samsung Epic 4G Touch [How-To]
- Learn How-To Install ClockworkMod Recovery on Galaxy Note
- Learn How-To Install ClockworkMod Recovery on Galaxy Ace
- Learn How-To Root Samsung Galaxy S II on Android 2.3.6 With XWKL1 Firmware