How To Root T-Mobile Galaxy S6 SM-G920T
The shiny Samsung Galaxy S6 with mixture of glass and matte metal body seems gorgeous. It does not only worth your attention because of high-end hardware, but also because of a lot of useful software that can take your lifestyle to next level. Despite this, some will still look for tricks to root the phone. Rooting your Android Galaxy S6 enables you to do every compatible thing you want without any official restriction. We hope the unofficial development ground of Android developers will drop so many useful tweaks for rooted users. Even, the CF-Auto-Rooting software is released to root your Samsung Galaxy S6 in a very short time using your Windows-based computer. Since this early version of rooting package, it works only with Android 5.0 firmware.
You need a Windows PC with USB drivers installed for phone. You can use Samsung KIES to install drivers but disable it after installation. Because KIES can disturb Odin3 that you need to use below.
DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or gets damaged following this guide.
Step #1: Download the CF-Auto-Root tool to root T-Mobile Galaxy S6 SM-G920T to your computer.
Step #2: Unzip the downloaded zip file into a folder and run Odin3.xxx.exe.
Step #3: Turn your S6 completely off.
Step #4: Reboot device into download mode by holding down Volume DOWN, Power and Home buttons until you see warning screen. Then press Volume Up button to enter in Download Mode.
Step #5: Once you’re in download mode plug the device to PC using USB cable. Odin will detect the device, ID:COM will turn yellow and a message saying ADDED will appear. (Note: If Odin doesn’t detect the device, make sure that USB drivers are properly installed on your computer).
Step #6: Click on PDA Button and locate the file having extension “.tar.md5” like CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t.tar.md5 from the folder where you’ve unzipped above files in the step 2. (Note: Don’t make any change. You just need to make sure that re-partition is unchecked).
Step #7: Click on Start button to start rooting process. Wait until you see PASS message on Odin and your device reboot. (Note: If you face FAIL message, close Odin, unplug device, turn it off and start process again).
Step #8: Launch the app drawer on your S6 and check whether SuperSU app is available or not. If available, your device is rooted successfully. You can also use Root Checker app from Play Store for this purpose.
That’s it, you have now a rooted Galaxy S6 (T-Mobile). If you experience any error, leave comment.